Products from Wilesco
No results were found for the filter!
Wilesco D2 Steam Engine This Wilesco steam engine is smaller than any of our models up to now. You certainly cannot do without this tiny beauty. Heated with a beeswax candle light the filligree oscillating cylinder purrs up and down and...
Wilesco D3 Steam Engine A filigree engine by Wilesco with its upright boiler and oscillating cylinder mounted on a base plate. The boiler is equipped with a safety spring valve, two water gauge glasses and a brass flywheel.
1 
Wilesco D4 Steam Engine Wilesco presents its next steam engine model D4 driven by a candle. The highly polished brass boiler generates steam pressure which drives the tiny filigree fly wheel. The black fire-proof base frame with its...
1 
Wilesco Steam Engine D6 Steam engine with horizontal boiler and oscillating cylinder. The powder-coated base plate has bore holes to fasten the engine on a board. During operation the pressure inside the boiler can be controlled with the...
2 
Wilesco D10 Steam Engine, Kit D5 This engine is equipped with a double-acting brass cylinder. The flywheel with centrifugal governor can be started in both directions. The chimney of the engine smokes just like in reality and has a dome...
6 
Wilesco D105 Steam Engine "Light Edition" This set includes the starter engine D10, a dynamo with street lamp and a drive belt. After the assembling of all parts the lamp lights up during operation.
1 
Wilesco D10/100 Steam Engine 100 years of Wilesco were the reason for this anniversary edition. In addition to its ancient look this engine has a graved boiler and a noble wooden case as gift box. Technically, this engine corresponds to...
6 
Wilesco D100E Steam Engine Kit This is the first experimental kit by Wilesco. The steam engine kit (D5) together with a dynamo and some electronic components are combined to an experimental and learning unit. After the assembly of the...
1 
Wilesco D11 Steam Engine Kit The new D11 kit from Wilesco and Tronico combines the steam engine with the popular metal construction kits. Breathe life into your Tronico superstructures! The D11 model consists of the D9 steam engine kit...
Wilesco D14 Steam Engine Steam engine with a double-acting brass cylinder on top of the boiler. This black and red painted engine with its smoking chimney persuades by its compact construction.
9 
Wilesco D141 Steam Engine A replication of a typic steam engine workshop of the 19th century. The engine is identical to D14 and true to original it smokes. Additionally, this model is equipped with a steam regulator and pressure gauge....
The Wilesco steam workshop family continues to grow. In addition to the well-known D141 and the new D161 the new D145 workshop will be added to the program. This model represents an historical production line including a Blacksmith, Drop...
New
Wilesco D16 Steam Engine This classic engine has a steam whistle with chain, a steam regulator and a centrifugal governor. The flywheel with its drive pulley and connecting rods made of shapely cast parts can drive numerous models....
9 
Wilesco D161 Steam Engine This years make over is the steam workshop D161 in a new colour and is technically changed with different drive models being used. The new colour of the base and engine plate, combined with the black boiler,...
3 
Wilesco D165 Steam Engine This assembly D165 can be the start of a small model plate. The package contains the steam engine D16, a large countershaft and a drilling machine. Four additional drive models can be connected to this...
5 
Wilesco D18 Steam Engine This particular engine smokes true to original and shows in a special way the conversion of thermal energy into electricity. The pressure gauge and steam whistle with chain give a feedback about the pressure...
8 
Wilesco D20 Steam Engine This engine is equipped with the biggest flywheel and cylinder, a pressure gauge gives information on the pressure inside the boiler. The steam regulator allows to control the rounds per minute of the flywheel...
20 
Wilesco D21 Steam Engine This steam engine persuades with its finishing in black and red. Especially with its polished brass boiler and steam regulator this engine looks elegant and powerful. Its special feature is the water pump which...
20 
Wilesco D22 Steam Engine Two cylinders drive the flywheel of this power pack which is equipped with an own countershaft. The boiler is identical to D20, during operation the chimney smokes true to original.
20 
Wilesco D24 Steam Engine This most powerful engine of the Wilesco range is unique with its hard-soldered boiler. The enormous power supply can be transmitted to many drive models by the steam regulator which is installed on the control...
25 
To celebrate the 70th anniversary, Wilesco is proud to announce a special edition of the D24. The limited edition of the D24 takes us back to 1950, when the production of the D24 first started. Like the first D24 engines from 1950, the...
New
Wilesco steam engine D32 el Return of a legend! The most powerful steam engine from Wilesco is back. After more than 40 years, Wilesco will produce a limited edition. The black painted base plate in combination with the grey an red...
50 
Wilesco D455 Steam Engine This engine persuades with its compact construction. A fire tube inside the boiler ensures a quick pressure generation. In contrast to most of the Wilesco engines it is equipped with an upright assembly.
5 
Wilesco D52 Marine Engine Boat steam engine with boiler and upright cylinder.
The short roof combined with the special color scheme and additional items such as the tyres five this engine an authentic historical look. The crane is fixed to the front axle and so is moved to the left and right with the steering. The...
5 
Wilesco D310 Foden lorry "Mighty Atom" Wilesco presents: the reproduction of the Foden lorry "Mighty Atom" which is true to original. The truck with its short wooden platform and driver's cab above the horizontal boiler was produced in...
Wilesco D320 Steam lorry This nostalgic lorry with remote control is a scaled model of a lorry series which dates from 1915. This historical platform lorry is equipped with a completely functioning steam drive. The boiler and the...
Wilesco A325 Platform trailer This platform trailer has a wooden plate like the steam lorry D320 and is a suitable enlargement to the traction engine.
Wilesco D305 Fire Truck The original to this completely functioning fire engine was produced in 1900 in Germany by Magirus. The steam engine ensures the drive of this vehicle which can be steered in all four directions. The steam...
The „Old Smoky“ is a classic in our production range. The smoking stack and integrated clutch ensure nostalgic steam fun. It is possible to upgrade these engines with a radio remote control (Z360) and tyres for the rear wheels. Also...
5 
Trailer A388 / A386 / A385 These water carts can be refilled with water and connected to the corresponding steamrollers and traction engines.
Wilesco D405 Steam Tractor This fully operational engine is a replication of a traction engine of the 19th century. The chimney of this engine smokes and there is a clutch for the drive. In contrast to the steam rollers, the traction...
5 
Lumber Wagon A425, A426 These truck trailers are equipped with fixed wooden logs and can be connected to the corresponding roller or traction engine.
Wilesco Showman's Engine In the past this Showman’s engine in its typical paint was an important attraction on each funfair. With the integrated clutch it is possible to drive further models. The chimney smokes true to original and the...
2 
Wilesco D430 Steam Locomobile This mobile engine with black-brass finish was used beginning of the 20th century by farmers. It is the only engine with two flywheels and folding chimney. Additionally, this engine is equipped with a...
5 
After a long time in research and development Wilesco is able to present a decalifying agent for steam boilers. One unit contains a 100 ml bottle of decalcifier and a detailed instructions on how to use it. The boiler should be filles...
Crane extension Z400 The crane from the new model D405/1 can be fitted as an addition to all Wilesco Traction Engines, kits or assembled models. The crane is atteched to the front axle and has all the same features as the D405/1.
Now, lorry and platform trailer can be equipped with an assembly to protect the cargo. We are able to personalize the canvas covers for you.
Horses had been used to pull the steam locomobile from one field to another. This team of horses can be harnessed to the locomobile.
All engines, models and accessories clearly arranged on 60 pages in an A4 format.
The drive belts transmit the power of the steam engines to the drive models. 5 drive belts in one bag.
This Wilesco steam engine oil is necessary to lubricate pistons, cylinders and all other bearings.
The cable remote control is fixed with a clip on the steering wheel and can be used for all mobile engines with streering wheel to change the direction.
This remote control for all steam rollers and traction engines to steer right and left contains the transmitter, receiver and the steering rod joining the receiver to the front axle. It is meant to complete existing engines, the assembly...
This is the supplement for Z360 to change the direction (forward and backwards). With the illustrated instructions the necessary modification is possible for everyone. Please note that this supplement is not suited for the kit version of...
There are useful rubber tyres for traction engines and steam rollers. They are simply pushed onto the metal wheels and protect them against scratches. Also the tractive power increases conside-rably.
There are useful rubber tyres for traction engines and steam rollers. They are simply pushed onto the metal wheels and protect them against scratches. Also the tractive power increases conside-rably.
Nostalgic Roundabout with Horses M 48 This roundabout with four horses enlarges the series of funfair models. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Band Sawyer M49 Worker at the band saw. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
2 
Angled countershaft M50 Transmission to enlarge your workshop, seven grooved pulleys can be fixed on any place of the shaft. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Drilling machine M51 Finely varnished cast iron frame, adjustable drilling plate, steel twist drill. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
4 
Two wheel grinder M52 Two genuine stone grinding wheels, 3 cm diameter. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Circular saw M53 Toothed circular saw blade, bench finely varnished tin plate. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Small countershaft M55 Sturdy die cast bearing mounting, four grooved pulleys that can be fixed on any place of the shaft. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Model plate M56 Consists of drilling machine M51, two wheel grinder M52, circular saw M53 and countershaft mounted on a base plate. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
6 
Large countershaft M57 Sturdy die cast bearing mounting, six grooved pulleys that can be fixed on any place of the shaft. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Blacksmiths hammer M58 Hammer and anvil solidly cast, driven by a large belt pulley and excentric cam. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
2 
Excenter press M59 Sturdy, finely painted cast iron frame, suitable for stamping of thin paper. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Hack-saw M60 Toothed saw blade, adjustable chucks. Small pieces of balsa wood can be sawn. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 Offer of the month
Forge shop M61 Three sequentially operating forge hammers. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
2 
Drop hammer M62 The drop hammer is lifted by a traction rope. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
2 
M66 Dynamo The dynamo with LED shows the conversion of mechanical into electric energy. Thanks to a small electronic change within the lamp, the model M66 can now be easily operated with small steam engines from D5/D6 and larger Please...
3 
Dynamo with streetlight M66/2 Dynamo M66 and streetlight are installed on a printed tin plate. Thanks to a small electronic change within the lamp, the model M66/2 can now be easily operated with small steam engines from D5/D6 and...
3 
Roundabout with gondolas M70 Funfair model with four gondolas. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Roundabout with globe M71 Globe with three air planes. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Elephant-design roundabout M72 Colourful juggling circus elephant. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Woodcutter M73 Worker with wooden block at the circular saw. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Shears grinder M74 During operation real sparks are coming up. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Press operator M75 Worker with a masher. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
2 
Carpenter M76 Worker with a framesaw at his work bench. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
2 
Boatswing M77 Boatswing with four boats like on the funfair. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Ferris wheel M78 A ferris wheel with six gondolas is a must on each funfair. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Nostalgic countershaft M79 This countershaft on a printed tin plate fits very well to the funfair and craftmen models. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Castle fountain M81 Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Washerwoman M83 The washerwoman easily carries out the hard work of former times. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Nostalgic Roundabout M84 This roundabout with four gondolas enlarges the funfaire series. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Organ Grinder M85 Nostalgic barrel organ grinder who plays a melody. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
4 
Blacksmith M86 Blacksmith with hammer and anvil at work. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Woodworkers M87 Two workers on the saw who saw a trunk of a tree. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Pump on the village green M88 A gardener at the village fountain pumping water. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Potter M89 The potter is equipped with a wooden potters wheel and a claypot. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
1 
Woodcutter M94 Woodcutter with axe and log of wood. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
The Striker M95 With each hit of the hammer the LED will flash (2 x AAA-batteries needed). Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Welder M96 During operation the dynamo below the welding rod generates a blue light. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
5 
Painter M97 A painter at work. Please keep in mind that flexible belts are required to operate this model. âž½ Go to the flexible belts
3 
Crane supplement for D11 Wilesco goes on combining steam engines and metal kits (by Tronico) and presents its first supplement. The build-up using the comprehensive and illustrated construction manual is child’s play. The result is a...
Assembly, complete, with steam tube to the chimney, D20 (until 2003)
Bearing support, small, 50 x 11 x 30 mm
Boiler with spring loaded safety valve incl. glass and fixing for D8, D9, D10
Boiler with spring loaded safety valve incl. glass and fixing for D12, D14, D141, D16, D161, D165
Boiler with spring loaded safety valve incl. glass and fixing for D18, D20, D22, D202, D222
Boiler with spring loaded safety valve incl. glass, polished brass for D21
Boiler with spring loaded safety valve incl. glass and fixing for D365, D368, D405, D495
Boiler with spring loaded safety valve incl. glass D366, D396, D406, D496
Boiler with spring loaded safety valve incl. glass, raw, not nickel plated and polished D24, D242
Burner slide, 80 mm for D8, D10, D101, D455, D52, D365, D375, D405, D415, D368, D310, D495
Burner slide, 120 mm for D18, D20, D22, D24, T90
Burner slide, brass, with black handle, 80 mm for D70, D106, D366, D396, D406,D496, D409, D499, D456, D305, D320
Cog wheel with axle for D320
Cog wheel, double, nickel for D365, D395, D405, D495, D368, D398
Cog wheel 51 mm, 30 tooth, hole 4 mm D305, D320, D430
Condensed water tray D11, D16 (until 2001), D20 and D22 (until 2002), D24, T125
Condensed water tray (boiler house) D10 (from 2002), D14, D141, D15, D16 (from 2001), D18, D21, D20 and D22 (from 2003), D455, D456
Crank disc (width 30 mm) with bolt screw (length 14 mm) for D16 (2001 to 2005), D18
Oscillating cylinder with piston rod, piston, spring and rod
Cylinder, complete, with piston, slide valve, piston connecting rods, crank disc and excentric
Excentric, small for D10, D101, D106, D14, D15, D22, D305, D310, D320, D365-D499
Handrail support, nickel plated, with nut
Manometer with connection on the botton, M6, 30 mm diameter, incl. adapter 01529
Manometer thread M6, diam. 35 mm, connecting tube and control panel for soldering
Manometer base, brass, 12 x 12 mm, thread connecting piece M6 x 0,75, spring loaded valve and manometer
Manometer base brass, 12 x 12 mm inside thread above M6 x 0,75, lateral M6 with spring loaded safety valve 01514 and sealing rings
Manometer with rearward thread M6 and adapter M6-M5, 35 mm diameter
Metal surround for water gauge glass 27 mm diameter
Metal surround for water gauge glass, 27 mm diameter, brass
Metal surround for water gauge glass, 37 mm diameter
Oiler filler cap, complete with screw
Oiler filler cap D15, D106, D305, D320, D366, D376, D406, D409, D416, D430, D456, D396, D496, D499 $5.49 *
Oiler filler cap, complete with screw, polished brass
Piston, diameter 9 mm
Wheel locking caps for 4 mm axle (nickel plated)
Wheel locking caps for 4 mm axle (brass)
Wheel locking caps for 5 mm axle (nickel plated)
Wheel locking caps for 5 mm axle (brass)
Collar nut / solder ring M 5 for steam whistle and dome steam whistle
Collar nut / solder ring, for steam pipe screws M 6 x 0,75
Screw for grooved pulleys D12, 14, 141, 15, 16, 161, 20, 21, 22, 24, 52, 305, 365, 395, 366, 396, 398, 405, 495, 406, 496, 409, 499, 430 10 pc. in a bag
Pipe coupling nut for steam pipe fixing nickel M6 x 0,75
Pipe coupling nut for steam pipe fixing brass M6 x 0,75
Sealing rings for oiler filler cap (10 pc. in a bag)
Sealing rings for steam whistle and dome steam whistle, 10 pieces, M5
Sealing rings for steam pipes screws (10 pc. in a bag)
Sealing rings for steam supply valve item n° 01600, 01601
"Slide valve rod with screw and a diameter of 5 mm for stationary steam engines (from year of construction 1990): D10, D106, D14, D141, D15, D22. Marine steam engine (from year of construction 1990): D48, D52. Mobile steam engine (from...
"Slide valve rod with screw and a diameter of 6 mm for stationary steam engines (from year of construction 1990): D15 Mobile steam engine: D456 D430 Steam tractor D305 D406 Old Smoky D366 Shoman's Engine D409"
Steam pipe, in 2 parts, without steam supply valve, brass for D14, D141